5Using the Channel Menu
5.1Channel
MENU [m] 
Channel 
ENTER [ ![MENU [m] Channel Antenna ENTER [ ]](/images/new-backgrounds/129217/129217133xi5.webp){kind=small}
]
This option is available when the input source is TV.
Channel
AntennaCable
Auto Program
Clear Scrambled Channel
Fine Tune
The displayed image may differ depending on the model.
5.1.1Antenna (Air/Cable)
MENU [m] 
Channel 
Antenna 
ENTER [ 
]
Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the LED display.
zAir / Cable
5.1.2Auto Program
The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.
To start Auto Program, follow these steps:
1Push 
MENU [m] 
Channel 
Auto Program 
ENTER [ 
] on your remote. The Antenna Source screen appears.
2On the Antenna Source screen, select the source of your product signal.
z
z
Air: If your product is connected to an antenna choose Air, and then press ENTER [ 
]. The product will automatically start memorizing channels.
Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER
[ 
]. Go to Step 3.
