![](/images/new-backgrounds/1137303/137303349x1.webp)
8System
8.14Anynet+ (HDMI-CEC)
MENU [m]
System
Anynet+ (HDMI-CEC)
ENTER [
]
8.14.1Anynet+ (HDMI-CEC)
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
z
z
z
z
z
z
z
z
You can only control Anynet+ devices using the product remote control, not the buttons on the product.
The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
For instructions explaining how to connect Anynet+ external devices, refer to the device’s user manual You must connect an Anynet+ device using an HDMI cable. Some HDMI cables may not support Anynet+ functions.
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the AV device is connected as a secondary display.
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
However, you can connect only one Anynet+ Home Theater. To connect an Anynet+ Home Theate, connect the Home Theater to the product using an HDMI cable then.
8 System 175