![](/images/new-backgrounds/1137303/137303355x1.webp)
8System
Problem |
| Possible Solution |
|
|
|
The message “Connecting to | z | You cannot use the remote control when you are configuring |
Anynet+ device...” appears on |
| Anynet+ or switching to a view mode. |
the screen. | z | Use the remote control after the product has completed Anynet+ |
| ||
|
| configuration or has finished switching to Anynet+. |
|
|
|
The Anynet+ device does not | z | You cannot use the play function when Plug & Play (initial setup) |
play. |
| is in progress. |
|
|
|
The connected device is not | z | Check whether or not the device supports Anynet+ functions. |
displayed. | z | Check whether or not the HDMI cable is properly connected. |
| ||
| z Check whether Anynet+ | |
|
| setup menu. |
| z Search Anynet+ devices again. | |
| z Anynet+ requires an HDMI connection. Make sure the device is | |
|
| connected to your product with an HDMI cable. |
| z Some HDMI cables may not support Anynet+ functions. | |
| z If the connection is terminated because there has been a power | |
|
| failure or the HDMI cable has been disconnected, please repeat |
|
| the device scan. |
|
|
|
8.15 DivX® Video On Demand
MENU [m]
System
DivX® Video On Demand
ENTER [
]
Shows the registration code authorized for the product. If you connect to the DivX web site and register using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit “http://vod.divx.com”.
8 System 178