Samsung BN68-00990V-03 manual Using the Photo Jpeg List, 800x800 pixels

Using the Photo (JPEG) List

You can play back the JPEG files saved on a memory device in various ways.

	1 After switching the mode to WISELINK, select a memory device that you
		have installed. (Refer to page 29)
	2	Press the œ or √ button to select Photo, then press the ENTER (	)
		button. JPEG files and existing folders are displayed.
	3	Press the …/†/œ/√ buttons to select a file, then press the ENTER (	)
Move Enter Return		button.
		➢ Pressing the button over a photo icon displays the currently selected
œœ 1/10 Page √√
219x171		photo in full screen. However, JPEG files smaller than 640x480 pixels
6 KBytes		are zoomed-in at 4 times their original size.
3/130
May 05,2006
		(e.g. If a photo’s original size is 200x200 pixels It is displayed at
		800x800 pixels)
		➢ Press the INFO ( ) button and select View to view a photo image at

Move Enter Photo Menu Return its original size.

➢Pressing the button over a folder icon shows the JPEG files included in

: Folder icon	the folder.
: Photo icon	➢ While a full screen is displayed, œ/√ buttons will let you see another
	photo image in the same folder.
: Move to the previous folder	➢ Press the PLAY/PAUSE (	) button when a Photo icon is selected to
stage icon	start a Slide Show.
	To exit WISELINK mode, press the WISELINK button on the remote control.
	➢ Moving to a photo may take a few seconds because the file needs to
	be loaded. At this point, the		icon will appear.

➢ This menu shows only the files whose extension is jpeg (or jpg). Files with other formats such as gif or tiff will not be displayed.

➢ Fifteen thumbnail photos are displayed per page.

➢ The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.

➢ Folders are displayed first and they are followed by all JPEG files in the current folder. The folders and JPEG files are sorted in alphabetical order.

➢ If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen. (Refer to pages 34~35)

➢ It takes a while to show JPEG files as thumbnail images.

➢ WISELINK for this product supports JPEG files up to 8K x 8K pixels. For progressive JPEG files or files whose size exceeds 8MB, the photo will be displayed as a thumbnail only. When trying to view a progressive JPEG file, the “Not supported mode” message will appear.

When trying to view a file exceeding 8MB, the “This file is too large to decode” message will appear.

➢ Press the WISELINK button on the remote control to turn on the WISELINK mode.

continued...

English - 30