Samsung BN68-00990V-03 manual Setting the Blue Eye, Setting upYour PC Software Based on Windows XP

Setting the Blue Eye

You can set the power of Blue LED to be on. If the power is off when Blue Eye is off, the Blue LED goes off after 5 seconds. This will save power and reduce eye fatigue.

1Press the MENU ( ) button to display the menu.

2Press the … or † button to select Setup, then press the ENTER ( ) button.

TV	Setup
More
Energy Saving	: Off
Screen Burn Protection
Blue Eye	: On
Move	Enter	Return

3Press the … or † button to select Blue Eye, then press the ENTER ( ) button.

4Select Off or On by pressing the … or † button, then press the ENTER ( ) button.

◆Off: LED(Blue) will not come on.

◆On: LED(Blue) will come on after you turn the TV off.

5Press the EXIT button to exit.

Setting upYour PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1Right click the mouse on the Windows Desktop, then click on Properties. The Display Properties will be displayed.

2Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings.

3Click on Advanced. A new settings dialog box will be displayed.

4Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate.

5Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment.

English - 25