Samsung LN-T4032H, BN68-01250B-00, LN-T2332H manual Storing Channels in Memory Automatic Method, Irc

Storing Channels in Memory (Automatic Method)

1.Press the MENU button to display the menu.

Press the ▲ or ▼ buttons to select “Channel”, then press the ENTER button.

2.Press the ▲ or ▼ buttons to select "Auto Program", then press the ENTER button.

3.Press the ▲ or ▼ buttons to select the antenna connection, then press the

ENTER button.

Air: “Air” antenna signal. / Cable: “Cable” antenna signal. /

Air+Cable: “Air” and “Cable” antenna signals.

4.When selecting the Cable TV system: Press the ENTER button to start the auto program. By default, the cable TV system is set to “STD”. If you want to select another type of cable system, press the ▲ or ▼ button to select “STD”, “HRC” or

“IRC”.

STD, HRC and IRC identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in your particular area. At this point the signal source has been selected.

Press the ENTER button to start the auto program.

To stop the search before it has finished, press the ENTER button with stop selected.

5.After all the available channels are stored, the “Auto Program” menu reappears. Press the EXIT button to exit.

TV	Channel
Antenna	: Air	►
Auto Program		►
Clear Scrambled Channel		►
Channel List		►
Name		►
Fine Tune		►
Signal Strength		►
LNA	: On	►
Move	Enter	Return
TV	Channel

Select the antennas to memorize.

Air		Start
Cable		Start
Air+Cable		Start
Move	Enter	Return

TV	Auto Program
Selects the cable system.
Analog	Start
STD
HRC
IRC
Digital
STD
HRC
IRC
Move	Enter	Return

Auto Program

Auto Program in Progress.

Cable Channel 50

50%

Stop

Enter Return

Plug & Play

Auto Program is completed. 16 Channels were memorized. Air : 16, Cable : 0.

OK

Enter Return

Alternately, you can press the AUTO PROG. button on the remote control to bring up the Auto Program menu.

English - 16