Samsung LN-T3732H, LN-T2332H Wall-Mount Adjustment LN-T4032H Sold separately, Entering the menu

Wall-Mount Adjustment (LN-T4032H) (Sold separately)

Once the wall mount is installed, the position of your TV can be easily adjustable.

TV Rear Panel Auto Wall-Mount

EX-LINK Cable (Not supplied)

Entering the menu

1.Press the MENU button to display the menu.

Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.

2.Press the ▲ or ▼ buttons to select “Wall-Mount Adjustment”, then press the ENTER button.

3.Adjust to the desired position using the ▲,▼,◄,► buttons.

4.Press the EXIT button to exit.

If you press an arrow button when no OSD is displayed on the TV screen, the Adjustment screen appears.

When you turn the power off, your TV moves to the initial installation position. When you turn the power on, your TV moves to the last

remembered position you adjusted.

Using the Remote Control Buttons

		Setup
TV	▲More
	Film Mode	: Off	►
	Wall-Mount Adjustment		►
	PIP		►
	Function Help : Off		►
	SW Upgrade		►
	Move	Enter	Return

Wall-Mount Adjusment

Position1

Position	1	2	3
Adjust	INFO	Center	Exit

	Button		Operations
			Wall-mount angle adjustment	Tilt Up, Tilt Down, Move right, Move left
			Reset	Moves to the initial installation position
			Remembering the position	1. Select the direction buttons of the remote control.
			and moving to the	2. Press the red button (Select Position 1).
			remembered position
	green			3. Adjust the set to a desired position following the wall mount
red	button	yellow		operating procedures.
button		button		4. The position you adjusted last is memorized as Position 1.

5.By using the green button (Select Position 2), and the yellow button (Select Position 3), you can save positions according to the procedures above.

6.You can save 3 respective positions to the red button (Select Position 1), green button (Select Position 2), and yellow button (Select Position 3).

If you press a button, the set automatically moves to that saved angle.

7.If you additionally move the set from a saved position, the last position is saved as the “final position”.

For installation, refer to the Installation Manual provided.

Forproduct installation and the installation and moving of the wall mount, make sure to consult a specialized installation company.

This installation manual is to be used when attaching the wall mount to a wall. When attaching to other building materials, please contact your nearest dealer

English - 65