English - 22
You can set the sound mode in the tOOLS menu.
When you set to "Dual I-II", the current sound mode is
displayed on the screen.
1. Press the tOOLS button on the remote control.
2. Press the ▲ or ▼ button to select “Dual I-II".
3. Press the ◄ or ► button to select required option.
4. Press the ENtER button.
Audio Type Dual
1/2
Default
A2
Stereo
Mono MONO Automatic
change
Stereo STEREO
↔
MONO
Dual DUAL
1 ↔
DUAL
2
DUAL 1
NICAM
Stereo
Mono MONO Automatic
change
Stereo MONO
↔
STEREO
Dual MONO
↔
DUAL
1
DUAL
2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
Selecting the Sound Mode
Picture Mode : Standard
Sound Mode : Custom
Sleep timer : Off
SRS tS Xt : Off
Energy Saving : Off
Dual l-ll ◄ Mono ►
Move Adjust Exit
tools
♦ Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume
every time the channel is changed. This feature lets you automatically adjust the volume of the
desired channel by lowering the sound output when the modulation signal is high or by raising the
sound output when the modulation signal is low.
♦ TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The +, - and MUtE buttons do not operate when the "TV Speaker" is set to "Off".
When "TV Speaker" is set to "Off", you can operate only “Sound Select” (in PIP mode) in Sound
menu.
♦ Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
➣
➣
BN68-01518H-Eng.indd 22 2008-05-15 �� 9:32:59