Samsung BN68-01691A-02 Scanning and Switching between Anynet+ Devices, Anynet+ Menu, Audio Device

English - 133

Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button.

Press the ENTER button to select “Anynet+ (HDMI-CEC)”.

2.Press the ▲ or ▼ button to select “Device List”, then press the ENTER button.

➣Anynet+ devices connected to the TV are listed.

If you cannot find a device you want, press the red button to scan for devices.

➣Only when you set “Anynet+ (HDMI-CEC)” to On in the “Setup” menu, the “Device List” menu appears.

3.Press the ▲ or ▼ button to select to a particular device and press the

ENTER button. It is switched to the selected device.

View TV
Device List
Recording: DVDR
DVDR Operation
Receiver	:	On
Setup
	Move	Enter	Return

➣Switching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

➣The time required to scan for devices is determined by the number of connected devices.

➣When the device scan is complete, the number of devices found are not displayed.

➣Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to search for the connected device.

➣If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the “Device List”

Anynet+ Menu

The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.

Anynet+ Menu	Description
View TV	Anynet+ mode changes to TV broadcast mode.
Device List	Shows the Anynet+ device list.
(device_name) Menu	Shows the connected device menus.
	E.g. If a DVD recorder is connected, the disc menu of the DVD recorder will appear.
(device_name) Operation	Shows the play menu of the connected device.
	E.g. If a DVD recorder is connected, the play menu of the DVD recorder will appear.
Record: (*recorder)	Starts recording immediately using the recorder. (This is only available for devices that
	support the recording function.)
(*recorder) Reserve Recording	Enables reserving a recording for the recorder. (This is only available for devices that
	support the recording reservation function.)
Stop Recording: (*recorder)	Stops recording.
Receiver	Sound is played through the receiver.

➣If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is connected, it will be represented as (*device_name).

TV Remote Control Buttons Available in Anynet+ Mode

Device Type	Operating Status	Available Buttons
	After switching to the device, when the	Numeric buttons
	menu of the corresponding device is	▲/▼/◄/►/ENTER			buttons
Anynet+ Device	displayed on the screen.	Color buttons / EXIT button
	After switching to the device, while		(Backward search) /			(Forward search)
	playing a file		(Stop) /	(Play) /		(Pause)
Device with built-in Tuner	After switching to the device, when you	CH / CH		button
	are watching a TV program
Audio Device	When Receiver is activated	VOL – /VOL + / MUTE button

➣The Anynet+ function only works when the active source on the TV remote control is set to TV.

➣The button works only while in the recordable state.

➣You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote control.

➣The TV remote control may not work under certain conditions. In this case, reselect the Anynet+ device.

➣The Anynet+ functions do not operate with other manufacturers’ products.

➣The , operations may differ depending on the device.