14

Program for Automatic Switching OFF of One Cooking Zone

This function permits to set a timer from 1 to 99 minutes for automatic turning OFF of one cooking zone only.

Note: It is not possible to set this program for both the cooking zones.

With the touch control switched ON press the timer keys or .

By pressing the key the initial value is 0 . By pressing the key the initial value is 99.

The displays of the cooking zones show " " (timer).

Then, within 10 seconds, set the cooking zone to be programmed as indicated in the chapter "Power Ignition and Adjustment of a Cooking Zone".

The indicator light on the top right of the cooking zone display lights up.

Then set the timer; press the timer keys or to increase or reduce the value.

The indicator light on the bottom right of the timer display lights up.

Now the program for automatic switching off is complete.

At the end of the countdown the cooking zone will switch off automatically and an acoustic signal (beep) will sound (for one minute only) and " 00 " will flash on the timer display.

Press any button of the touch control to reset the timer.

Note: The program for automatic switch off can be cancelled at any time by resetting the power level of the cooking zone (power level " 0 ").

Page 14
Image 14
CDA HVC 32 manual Program for Automatic Switching OFF of One Cooking Zone