English - 56
The teletext pages are organized according to six categories:
Part Contents
ASelected page number.
BBroadcasting channel identity.
CCurrent page number or search indications.
DDate and time.
EText.
FStatus information.
FASTEXT information.
Teletext information is often divided between several pages displayed in sequence,
which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
Press the TV button to exit from the teletext display.
Setting Up Your Remote Control
After the television has been set up properly, your remote control can operate in different modes: TV, VCR, DVD, Set-Top Box,
Cable Box. Pressing the corresponding button on the remote control allows you to switch between these modes and control
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Set-Top Boxes and Cable Box.

Setting Up the Remote to Operate Your VCR, DVD, STB and Cable Box

1. Turn off your VCR, DVD, STB and Cable Box.
2. Press the MODE button and make sure that the VCR, DVD and STB LED is
illuminated.
3. Press the SET button on your TV’s remote control.
4. Using the number buttons on your remote control, enter three digits of the VCR,
DVD, STB or Cable Box code listed on pages 57~58 of this manual for your
brand of VCR, DVD, STB or Cable Box. Make sure you enter three digits of the
code, even if the rst digit is a “0”. (If more than one code is listed, try the rst
one.)
5. Press the POWER button on the remote control. Your VCR, DVD, STB or Cable
Box should turn on if your remote is set up correctly. If your VCR, DVD, STB
or Cable Box does not turn on after set up, repeat steps 2, 3 and 4, but try
one of the other codes listed for your brand of VCR, DVD, STB or Cable Box.
If no other codes are listed, try each VCR, DVD, STB or Cable Box code, 000
through 080.
When your remote control is in VCR, DVD or STB mode, the volume
buttons still control your TV’s volume
N
-
-
-
O
N
N
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
TV
SET RESET
VCR DVD STB
BN68-01737C-Eng.indb 56 2008-08-12 �� 5:47:36