Securing the TV to the Wall
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the Safety Flyer included with your TV. For added stability and safety, you can purchase and install the
The TV-Holder Kit (Sold Separately)
The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw appropriate for the wall or cabinet you intend to secure the
05 Other Information
| (M6 X L16 : 32 ~ 40 inch TVs) | (M8 X L19 : 46 inch TV) |
| Screw 1 | Screw 2 |
Installing the
1.Remove the screw attached to the back of your TV, and then connect the
the TV Holder Kit that is designated for your TV.
✎✎ Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.
2.Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed. ✎✎ If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a
molly to anchor the screw.
3.Tie the
✎✎ When attaching the TV Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes. ✎✎ Check the cord occasionally to make sure it is secure.
✎✎ Before moving the TV, separate the connected cord first.
Wall
4.Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.
To purchase the
– In the United States:
– In Canada:
