Step 6: Remote Control
Remote Control Buttons and Functions
✎✎This is a special remote control for the visually impaired and has Braille points on the Power, Channel, Volume, Stop, and Play/Pause buttons.
Step 7: Media Play Features
The Media Play feature lets you connect to your PC through your home network and stream PC audio and video files to your HDTV using your remote. To use IPTV or Samsung PC Share Manager, you must connect your TV to your network. You can attach the TV to your network in two ways, by cable, using CAT 5 cable, or wirelessly, using a Samsung Wireless LAN Adapter. Instructions for both connection methods are below.
Network Connection - Wireless
You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first attach a “Samsung Wireless LAN Adapter” (WIS09ABGN - sold separately) to either the USB 1 or USB 2 (HDD) port on the back of your TV. See the illustration below.
|
| TV Side Panel |
|
| Samsung Wireless LAN |
| Wireless IP | Adapter |
|
| |
The LAN Port on the Wall | sharer |
|
Turns the TV on and off.
Selects the HDMI mode directly.
Have direct access to channels.
Press to select additional channels (digital) being broadcasted by the same station. For example, to select channel
Adjusts the volume.
Opens the OSD.
Views Media Play (USB).
Quickly select frequently used functions.
Returns to the previous menu.
These buttons are for the Channel list, Media Play (USB) menu, etc.
Use these buttons in Media Play (USB) and Anynet+
POWER SOURCE
HDMI
MUTE
CH LIST
MENU
MEDIA.P FAV.CH
TOOLSINFO
RETURNEXIT
A B C D
S.MODE SLEEP MTS
P.MODE P.SIZE CC
Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed. (Using the remote control with this button set to off will reduce the battery usage time.)
✎✎Only PC550, PC590 models
Returns to the previous channel.
Cuts off the sound temporarily.
Changes channels.
Displays channel list on thescreen.
Displays Favorite Channel Lists on the screen. Displays information on the TV screen.
Selects the
Exits the menu.
S.MODE: Press to select the sound mode.
SLEEP: Use to set the sleep timer function.
MTS: Press to choose stereo, mono or Separate Audio Program (SAP broadcast).
P.MODE: Press to select the picture mode.
Network Connection - Wired
There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:
The Modem Port on the Wall | External Modem | TV Rear Panel |
|
| |
(ADSL / VDSL / Cable TV) |
| |
Modem Cable (Not Supplied) | LAN Cable (Not Supplied) |
|
The LAN Port on the Wall | TV Rear Panel |
| LAN Cable (Not Supplied) |
Configuring the Network Connection - Wired
Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the Internet so you don’t have to enter them manually.
To configure your network connection for a network that uses DHCP, follow these steps:
|
| or | TV Rear Panel | ||
|
|
| |||
|
|
|
|
| |
LAN Cable (Not Supplied) |
|
|
|
| |
|
|
| |||
|
|
|
|
|
|
Samsung’s Wireless LAN adapter supports the IEEE 802.11A, IEEE 802.11B, IEEE 802.11G, and IEEE 802.11N wireless communication protocols. For your TV to connect to your network, the wireless router or modem you use must also support one of these protocols. The fastest of these protocols is IEEE 802.11N.
Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless modem or router) to transmit an encrypted security code called an access key.
For regular connections, your TV is compatible with the following security protocols: yy Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
yy Encryption Type: WEP, TKIP, AES
Configuring the Network Connection - Wireless
The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.
To configure your network connection for a network that uses DHCP, follow these steps:
1. Connect your TV to your network | Wireless Network Setup |
P.SIZE: Selects the picture size.
CC: Controls the caption decoder.
1. Connect your TV to your |
network as shown in one of the |
Wired Network Setup
as shown in the illustrations | Select a network | : Not Selected | r |
Changing Channels and Adjusting the Volume
Adjust the volume by pressing the Volume button | Change the channels by pressing the Channel button on the remote. |
|
| illustrations above. |
2. | Turn on your TV, press the MENU |
| button on your remote, and then |
| select Setup → Network. |
3. | Set the Network Type to Wired if |
| it is not already set to Wired. |
4. | Select Network Setup. The |
| Wired Network Setup screen |
| appears. |
Internet Protocol Setup | : Auto Setup | r | |
IP Address | : |
|
|
Subnet Mask | : |
|
|
Gateway | : |
|
|
|
|
|
|
DNS Setup | : Auto Setup |
|
|
DNS Server | : |
|
|
UMove EEnter | RReturn | ||
| above. | Internet Protocol Setup | : Auto Setup | |
2. | Turn on your TV, press the MENU | IP Address | : |
|
| button on your remote, and the | Subnet Mask | : |
|
| select Setup → Network. | Gateway | : |
|
3. | Set the Network Type to |
|
|
|
DNS Setup | : Auto Setup | |||
| Wireless if it is not already set to | DNS Server | : |
|
| Wireless. | UMove EEnter RReturn | ||
|
| |||
4. | Select Network Setup. The |
| Wireless Network Setup screen appears. |
5. | On the Wireless Network Setup menu, select an AP(Access Point) and ad |
on the remote. | ✎✎If your TV is attached to a cable or satellite box, change the channel using | ||
|
| CH LIST | |
|
| MENU | the box’s remote. |
✎✎You can also change the channels by pressing the z button on the front panel of your TV and adjust the volume by pressing the ybutton.
5.On the Wired Network Setup menu, set Internet Protocol Setup and DNS Setup to Auto Setup. Auto Setup acquires and enters the necessary internet values automatically.
6.Select Network Test to check Internet connectivity.
hoc network. if you have selected network with a security key, the Security |
Key screen appears. |
6. Enter the security key using the numbers on the remote, and then press the |
Blue button on your remote. |
Viewing the On Screen Menus
To view the On Screen Menus, follow these steps: |
| MENU | |
MEDIA.P | FAV.CH | ||
1. Turn on your TV, press the MENU button on your | |||
TOOLS | INFO | ||
remote. The main menu appears. | |||
The menu’s left side has the following menu |
|
|
options: Picture, Sound, Channel, Setup, Input, Application, and Support.
2.Press the ▲ or ▼ button on your remote to select a menu option, and then press the ENTEREbutton.
3.When done using the menu, press the EXIT button on your remote to exit.
Selecting a Source
To watch a movie on your |
|
|
|
your favorite TV show, you must select the correct | POWER | ON/OFF | |
source. A source is a device, such as a |
|
| SOURCE |
|
| ||
player, a cable/satellite box, antenna or a cable TV |
|
| |
|
|
| |
input. Sources can be connected to your TV through |
|
|
|
the HDMI, DVI, Component, Composite, or |
|
|
|
connections, or through the Antenna or Cable In connections. |
|
|
|
To view the signal from a source connected to the HDMI, DVI, Component, Composite, or
Connecting a USB Device for Media Play
You can enjoy photo, | MediaPlay |
|
| ||
music, and movie files |
|
|
|
|
|
stored on a USB device | Videos |
|
| ||
by connecting it to the TV |
|
|
|
|
|
and using the Media Play |
|
|
|
|
|
feature. To connect a USB |
|
|
|
|
|
device for Media Play, |
|
|
|
|
|
follow these steps: |
|
|
|
|
|
1. Turn on your TV. | SUM |
| Change Device |
| View Devices EEnter RReturn |
2.Connect a USB device
containing photo, music and/or movie files to the USB 1 or USB 2 (HDD) jack on the side of the TV.
3.When USB is connected to the TV, popup window appears. Then you can select Media Play.
✎✎Some networks are Static IP networks. If your network is a Static IP network, you can not use DHCP to configure the network connection. Instead, you must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually. For instructions explaining how to configure a Static IP network, see your user’s manual.
| ✎✎ If your network uses WEP security encryption, 0~9 and A~F will be |
| available on the Security Key screen. Use the Direction button on your |
| remote to move to the characters and the enter key to select them. |
7. | On the Wireless Network Setup menu, set Internet Protocol Setup |
| and DNS Setup to Auto Setup. The Auto Setup acquires and enters the |
| necessary internet values automatically. |
8. | Select Network Test to check internet connectivity. |
✎✎For more information, see your user’s manual.
