Connecting/DisconnectingSetting up a wireless connection to a printer

1

Slide the mode switch to (playback)

 

 

 

(Wireless) Menu [Connect/Disconnect]

See Menus and Settings (p. 32).

Even if you press the button without displaying the menu in playback mode, the same screen will be displayed.

2 After confirming that [1.WA-1] is selected as the [Target Device], use the or buttons to select [Connect] and press (or ).

The monitor will display “Connect- ing”, and soon the connection will be complete.

If a device other than [1.WA-1] is selected as the target device, use the or button to select [Tar- get Device], then use the or button to select [1.WA-1].

In situations where a number of wireless print adapters are available for connection (have been registered as target devices) (p. 102), select the wireless print adapter you wish to connect to as the target device.

When the wireless connection starts, the camera’s wireless lamp and the wireless print adapter’s lamp will both begin to blink blue. When the wireless connection has been com- pleted, both lamps will remain on (without blinking).

You can also start a wireless connection without using the

menus by continually pressing the button.

When the wireless connection has been completed, the icon will display. This shows the strength of the connection’s radio waves.

If a connection cannot be completed due to weak radio waves or some other reason, the connection will automatically be terminated after 30 seconds.

For instructions on how to print once you have set up a wireless

100connection, please refer to the Direct Print User Guide.