Cannot register this image!

You attempted to register an image recorded in a different camera or a movie as a start-up image.

Protected!

You attempted to erase or edit a protected image, movie or sound memo.

Too many marks.

Too many images have been marked with print settings, transfer settings or slide show settings. Cannot process any more.

Cannot complete!

Could not save the print, transfer or slide show settings.

Unselectable image.

You attempted to set the print settings for a non-JPEG image.

Exx

(xx: number) Camera malfunction. Turn the power off and then back on, then shoot or play back. A problem exists if the error code reappears. Note the number and contact your Canon Customer Support Help Desk. If an error code displays directly after taking a picture, the shot may not have been recorded. Check image in playback mode.

Connection has failed x

Wireless connection has failed. Please follow the instructions below corresponding to the number shown in the error message.

1

An error has occured when you set up a wireless connection to

2

a computer. Please refer to the Software & Wireless Guide.

3

 

 

Wireless connection has failed. Either shorten the distance

4

between the camera and the wireless print adapter; change

the orientation of the camera or the angle of the wireless print

5

adapter; or change the channel settings. Then establish a

 

 

wireless connection again.

When a large volume of images (around 3,000) is stored on the memory card, it may not be possible to establish a wireless

7connection. In such a case, use a memory card reader to store the necessary images in a computer, then reduce the images on the memory card and try again to establish a wireless connection.

Messages of List

117