Ending the wireless connection1 Slide the mode switch to (playback) (Wireless) Menu [Connect/Disconnect]

See Menus and Settings (p. 32).

2 Use the or button to select [Discon- nect], then press .

The wireless connection will end.

If displays during wireless connection, it means that the connection is very good. The fewer the antennas displayed, the worse the wireless connection is. When and the wireless lamp both blink, it indicates an extremely bad connection. In such a case, shorten the distance between the camera and the wireless adapter.

Please be aware of the points below when using a wireless connection between the camera and a printer. Failure to follow these instructions may terminate the connection.

-Do not use a wireless connection near to a microwave oven or any other appliance which emits electromagnetic waves.

-Do not put the camera and the printer far apart.

-Do not place objects in between the camera and printer. If a number of wireless print adapters are available for connection, select [Target Device] and press the DISP. button to confirm which wireless print adapter you can connect to. The lamp on the available adapter will blink in the following sequence: blue, blue, orange.

If you slide the mode switch while using a wireless connection to a printer, the wireless connection will be terminated.

If you end the wireless connection while printing, printing will be interrupted.

Connection Wireless

101