Using the Auto Steam / Crusty Cook Feature
The Auto Steam & Crusty Cook( ) feature provide pre- programmed cooking time. You do not need to set either the cooking time or power level. You can adjust the size of the serving by turning the
dial knob.
First, place the food in the centre of the turntable and close the door.
1. Press the Auto Steam & Crusty COOK ( ) button.
Using the Mode & Container
1.Auto steam cook :
water 500 ml
Steam plate / crusty plate | Steam Tray | Stainless Steel Lid |
|
|
2. Auto crusty cook :
Steam plate / crusty plate | Low rack | high rack |
|
EN
2.Select the type of food that you are cooking by pressing
the Auto Steam & Crusty COOK ( ) button. Refer to the table on the following page for a description of the various
•Auto steam cook :
•Auto crusty cook :
3. Select the size of the serving by turning the dial knob.
4.Press Start( ) button.
Result: The food is cooked according to the pre-
programmed setting selected.
When cooking has finished, the oven will beep and flash “0” four times. The oven will then beep one time per minute.
Caution!!
•Never use this Pro Steamer with a different product or model. It may cause a fire or fatal damage to the product.
•Do not use the Pro Steamer without water or food inside.
When you use this Pro Steamer, pour at least 500ml of water before use. If the amount of water is less than 500ml, it may cause incomplete cooking, or may cause a fire or fatal damage to the product.
•Caution must be taken when removing the container from inside the Pro Steamer after cooking, as it will be very hot.
•The Pro Steamer should be used only in the mode of "Auto steam /
Crusty cook ( ) : S-1 to S-5".
•The crusty plate should be used only in the mode of "Auto steam /
Crusty cook ( ) : C-1 to C-5".
•Make sure you install the cover onto the Pro Steamer so that it fits into the Steam plate / Crusty plate.
The eggs or the chestnuts would be explode without setting the steam cover and steam plate as instructed on the Instruction book.
How to clean the Steam plate / Crusty Plate
Clean the Steam plate / crusty plate with warm water and detergent and rinse off with clean water.
Do not use a scrubbing brush or a hard sponge otherwise the top layer will be damaged.
Please Note
The Steam plate / crusty plate is not
15