I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an air or a cable TV system (according to the instructions on pages 13~16).
•Please be sure to match the color coded input terminals and cable jacks.
1
Connect a coaxial cable between the “ANT 1 IN (AIR)” (or “ANT 2 IN (CABLE)”) terminal on the TV and the antenna out terminal on the VCR.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
2
Connect a set of audio cables between the “AV IN 1 (R, L)” jacks on the TV and AUDIO OUT jacks on the VCR.
If you have a mono VCR, connect L (mono) to VCR audio out using only one audio cable.
3
Connect a video cable between the “AV IN 1 (VIDEO)” jack on the TV and the VIDEO OUT jack on the VCR.
Refer to your VCR’s instructions for more information about how to view your VCR tape.
| TV Rear Panel |
| |
2 |
| From Cable | 1 |
| 3 | ||
Audio Cable | Video Cable | ||
|
|
| Coaxial |
|
|
| Cable |
VCR Rear Panel | From Antenna |
| |
|
| ||
• Also, you can connect to “AV IN 2” on the side panel of TV.
