Samsung CL17M2MQ Connecting to a Cable Box that Descrambles All Channels, This terminal might be labeled ANTOUT, VHF OUT or simply, OUT., Connecting to a Cable Box that Descrambles Some Channels, This terminal might be labeled ANTIN, VHF IN or simply, IN.

11
INSTALLATION
Connecting to a Cable Box that Descrambles All Channels
▼
1
Find the cable that is con-
nected to the ANTENNA
OUT terminal on your
cable box.
This terminal might be labeled
“ANTOUT”, “VHF OUT” or simply,
“OUT”.
ANT IN
2
Connect the other end of
this cable to the VHF/UHF
antenna terminal on the
back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
▼
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
terminal on your cable
box.
This terminal might be labeled
“ANTIN”, “VHF IN” or simply,
“IN”.
2
Connect this cable to a
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT ter-
minal on the splitter and
the INterminal on the
cable box.
Incoming Cable
Splitter
Incoming Cable
Cable Box
Splitter
Continued...
4
Connect a coaxial cable
between the ANTENNA
OUTterminal on the cable
box and the B–INterminal
on the RF(A/B) switch.
Incoming
Cable
Cable Box
RF (A/B)
Switch
Splitter