installing the hob

Be sure the new appliance is installed and grounded only by qualified personnel. WARNING Please observe this instruction. The warranty will not cover any damage that may

occur as a result of improper installation.

Technical data is provided at the end of this manual.

Regulations and compliance

This appliance meets the following standards:

EN 60335 - 1 and EN 60335 - 2 - 6, relating to the safety of electrical appliances for household use and similar purposes;

EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric cookers, hobs, ovens, and grills for household use;

EN 55014-1

EN 55014-2

EN 61000 - 3 - 2; and

EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC).

This appliance complies with the following EU Directives:

• 2006/95/EC, Low Voltage Directive

• 2004/108/EEC, Electromagnetic Compatibility Directive

Safety instructions for the installer

A device must be provided in the electrical installation that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm. Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to be removed from the holder), earth leakage trips and contactors.

With respect to fire protection, this appliance corresponds to EN 60335 - 2 - 6. This type of appliance may be installed with a high cupboard or wall on one side.

Drawers may not be fitted underneath the hob.

The installation must guarantee shock protection.

The kitchen unit in which the appliance is fitted must satisfy the stability requirements of DIN 68930.

For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.

On tiled work surfaces, the joints in the area where the hob sits must be completely filled with grout.

On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in place with a suitable artificial resin or mixed adhesive.

Ensure that the seal is correctly seated against the work surface without any gaps. Additional silicon sealant must not be applied; this would make removal more difficult when servicing.

The hob must be pressed out from below when removed.

A board is to be installed underneath the hob.

The ventilation gap between the worktop and front of the unit underneath it must not be covered.

12_ installing the hob

CTN264EA01_XEE_-00322A_EN.indd 12

8/2/2010 9:50:40 AM

Page 12
Image 12
Samsung CTN264EA01/XEE manual Installing the hob, Regulations and compliance, Safety instructions for the installer

CTN264EA01/XEE specifications

The Samsung CTN264EA01/XEE is a sophisticated home appliance that combines cutting-edge technology with practical features to enhance modern living. As a leading brand in electronics, Samsung brings innovation and efficiency into the kitchen with this stylish product.

One of the standout features of the CTN264EA01/XEE is its spacious interior. With ample storage capacity, this appliance can accommodate a wide variety of food items, making meal preparation easier and more efficient. The shelves are designed to be adjustable, allowing users to customize the configuration according to their needs. This flexibility ensures that both small and large items can fit comfortably inside.

The CTN264EA01/XEE incorporates advanced cooling technologies that ensure optimal preservation of food items. It utilizes a multi-air flow system, which evenly distributes cool air throughout the interior, preventing any hotspots and helping to maintain consistent temperatures. This results in fresher produce and longer-lasting food items, reducing waste and making grocery shopping more economical.

Energy efficiency is another highlight of the CTN264EA01/XEE. It is designed to consume minimal energy while delivering maximum performance. This eco-friendly approach not only helps reduce electricity bills but also promotes sustainability, making it an excellent choice for environmentally-conscious consumers.

In terms of design, the appliance boasts a sleek and elegant appearance that will complement any kitchen decor. The stainless-steel finish is not only aesthetically pleasing but also practical, as it is resistant to smudges and easy to clean. The interior features bright LED lighting that illuminates the entire space, allowing users to easily see all contents at a glance.

Additionally, the Samsung CTN264EA01/XEE pays attention to user convenience with features like a user-friendly control panel and a variety of organization options. Consumers can adjust temperature settings, activate quick freeze modes, or monitor energy consumption with ease.

Overall, the Samsung CTN264EA01/XEE is more than just a refrigerator; it is a reliable partner in the kitchen that combines efficiency, style, and advanced technology to enhance everyday life. Whether for a bustling family or a busy individual, this appliance is designed to meet diverse needs while ensuring food safety and freshness.