Samsung CX4 manual 121

Problem	Cause	Solution	Refer to
The flash does not fire.	The flash cannot be used in the	To shoot with the flash, change	P.52,
Or, the flash cannot	following cases:	the settings or mode.	P.128
charge.	• In bracket shooting
	• In continuous mode
	• In movie mode
	• In discreet mode
	• In pets mode
	In some scene modes, the flash is
	disabled by default.
	The flash is set to flash off.	Cancel Flash Off.	P.31
	Battery is exhausted.	Charge the rechargeable battery.	P.23
Even though the flash	The distance to the subject	Get closer to your subject and	P.84,
fired, the picture	exceeds the flash range.	shoot. Change the flash mode or	P.128
is dark.		the ISO setting.
	The subject is dark.	Correct the exposure. (Exposure	P.82
		compensation also changes the
		light intensity of the flash.)
	The light intensity of the flash is	Adjust the light intensity of	P.75
	not appropriate.	the flash.
The image is too bright.	The light intensity of the flash is	Adjust the light intensity of	P.31,
	not appropriate.	the flash. Alternatively, move	P.75
		a little away from the subject
		or illuminate the subject with
		another light source instead of
		using the flash.
	Subject is overexposed. (The [!AE]	Correct the exposure.	P.82
	symbol appears.)	Cancel exposure time.	P.75
	The brightness of the picture	Adjust the brightness of the	P.99
	display is not appropriate.	picture display.
The image is too dark.	The shot was taken in a dark place	Cancel Flash Off.	P.31
	while set to flash off.
	The subject is underexposed. (The	Correct the exposure.	P.82
	[!AE] symbol appears.)	Set the long exposure time.	P.75
	The brightness of the picture	Adjust the brightness of the	P.99
	display is not appropriate.	picture display.
The image lacks natural	The picture was shot in conditions	Add a white object to the	P.83
color.	that made it difficult for auto	composition, or use a white
	white balance to adjust the white	balance setting other than auto.
	balance.
The date or recording	The screen display function is set	Press the DISP. button to change	P.40
information does not	to no display.	the display.
appear on the screen.
The brightness of the	Ambient lighting is poor or differs	This is normal.	—
picture display changes	from that used for autofocus..
during AF.

Appendices

10

121