Samsung CX4 manual Using the Self-timer, Press the ADJ./OK button !to select the mode

If you are using the camera for the

Note-------------------------------------------------------------------------------------

•The flash mode setting is retained until you press the ADJ./OK button toward F (Flash) again.

•The flash does not fire when shooting movies, in continuous mode, in multi- target AF, in dynamic range double-shot, and in bracket shooting.

•FlashGlevel can be adjusted using theG[Flash Exposure Compensation] item ( P.75) in the shooting menu ( P.71).

•The auxiliary flash fires to increase the AE accuracy.

•The flash can notGbe used in some shooting modes or with some shooting menu options ( P.124).

Using the Self-timer

You can set the self-timer to shoot afterGeither two or ten seconds, or you can select [Custom Self-Timer] ( P.75) to customize the self- timer setting.

1 With the camera ready to shoot, press the t(Self-timer) button.

• A list of self-timer mode settings appears on the picture display.

first time, read this section

2 Press the ADJ./OK button !"to select the mode.

•The self-timer symbol and the number of seconds are displayed at the upper left of the picture display.

9999 4:3 F

.

32

3 Press the shutter release button.

•When set to [10], the self-timer lamp lights for 8 seconds when the self-timer starts and then blinks for the final 2 seconds before the picture is taken.

•When set to [Custom Self-Timer], the self-timer lamp blinks for 2 seconds before each picture is taken, and pictures are taken at the set shooting interval. The focus position is set for the first shot.

•When set to [Custom Self-Timer], press the MENU button to cancel the self-timer during shooting.

Note-------------------------------------------------------------------------------------

•The camera remains in self-timer mode even after the image is shot. To cancel the self-timer, press the tbutton and change the self-timer setting to [Self-Timer Off].

•When the self-timer is set to 2 seconds, the self-timer lamp does not light or blink.

•When the self-timer is set, the [Interval Shooting] setting is disabled.