Setting up Your Monitor
Connecting Your LCD Monitor
➂ ➄
➃
➄
Figure 3. Cable connections
1
2
Turn off your computer and unplug its power cord.
Connect the signal cable to the 15-pin D-sub connector on the back of your monitor.
3 | Connect the signal cable to the video port on your computer, video board, video card, |
or graphics card. | |
4 | Connect the power cord for your monitor to the DC adapter and connect the adapter |
jack to the DC power port on the back of your monitor. | |
5 | Plug the computer and monitor power cords into a nearby power mains outlet. |
| |
6 | Turn your computer and monitor on. If your monitor displays an image, it has been |
successfully installed. | |
7 | If necessary, install the video driver for this monitor (see “Installing the Video Driver” |
on page 7). | |
8 | After your monitor has been fully installed, run Auto Adjustment (see page 11). |
|
English 5
