REATTACHING THE REFRIGERATOR DOORS
Reattaching the Freezer Door
1)Reattach a phillips screw (➀) and two hex head screws (➁) to the hinge completely.
2)Place the hole in the bottom of the door (➃) over the hinge (➂).
3)Insert the upper hinge shaft (➄) into the hole (➅). After levelling between the hinge brackets (➆). Reattach and close the latch (➇) along the arrow.
Connect the water tube (➈) and the wires (➉). Then, place the water tube(➈) on the hanger (11 )
Be sure to insert the water tube and push to the end.
NOTE
4)Put the connector (12 ) in the guide (13 ) of the
5)Put the front part of the upper hinge cover (14 ) on the front part of the upper hinge (15 ) and reattach it from the front of the upper hinge cover first.
6)Reattach a phillips screw to the hinge cover (16 ).
30
