To use an outside power source
You can operate your camcorder using the power from the wall outlet (wall socket) by making the same connections as you do when charging the battery pack. The battery pack will not lose its charge in this case.
To remove the battery pack
1Turn off the power, then press PUSH.
2Remove the battery pack in the direction of the arrow.
POWER switch
1 
2 
PUSH
When storing the battery pack
Fully discharge the battery before storing it for an extended period (p. 61).
To check the remaining battery (Battery Info)
Set the POWER switch to OFF(CHG), then press DISP/BATT INFO.
After a while, the approximate recordable time and battery information appear for about 7 seconds. You can view the battery information for up to 20 seconds by
pressing DISP/BATT INFO again while the information is displayed.
Remaining battery (approx.)
BATTERY INFO
BATTERY CHARGE LEVEL
0% | 50% | 100% |
REC TIME AVAILABLE
LCD SCREEN : 85 min
VIEWFINDER : 99 min
Recording capacity (approx.)
You can check the remaining battery charge on the LCD screen.
Indicator Status
Sufficient power remaining
Battery low, recording/ playback will stop soon.
Replace the battery with a fully charged one, or charge the battery.
Charging time
Approximate time (min.) required when you fully charge a fully discharged battery pack.
Battery pack | Charging time |
115 | |
|
|
135 | |
|
|
170 | |
|
|
390 | |
|
|
Started Getting
Continued , 13