bNotes
•When you are connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting cable to the video input jack, and the red (right channel) or the white (left channel) plug to the audio input jack on the device.
•When you connect a device via an A/V connecting cable, set [DISP OUT] to [LCD] (the default setting) (p. 43).
1 Prepare your camcorder for playback.
Insert the recorded cassette.
Slide the POWER switch repeatedly to turn on the PLAY/EDIT lamp.
2 Insert the recording media in the recording device.
If your recording device has an input selector, set it to the appropriate input (such as video input1, video input2).
3 Connect your camcorder to the recording device (VCR or DVD/ HDD recorder) with the A/V connecting cable (supplied) 1, an A/V connecting cable with S VIDEO (optional) 2 or an i.LINK cable (optional) 3.
Connect your camcorder to the input jacks of the recording device.
4 Start playback on the camcorder, and recording on the recording device.
Refer to the operating instructions supplied with your recording device for details.
5 When dubbing is complete, stop your camcorder and the recording device.
bNotes
•To record the date/time and camera settings data when connected by the A/V connecting cable, display them on the screen (p. 34).
•The following cannot be output via the 
DV Interface (i.LINK):
–Indicators
–Pictures edited using [P EFFECT] (p. 38)
•When connected using an i.LINK cable, the recorded picture becomes rough when a picture is paused on your camcorder while recording.
•When connected using an i.LINK cable, data code (date/time/camera settings data) may not be displayed or recorded depending on the device or application.
Dubbing/Editing
45