Samsung DCS-408, DCS-408I Program Station Key Extenders

Samsung System Administration Guide

DCS-408 & 408i November 2001

Program Station Key Extenders

[MMC 107]

You can view stations’ programmable key assignments and add extenders to some of

these keys for easy one-touch operation of frequently-used features.

An extender is a number that makes the otherwise general function of a programmable

key more specific. For example, adding the digit ‘2’ to a PAGE key (“PAGE2”) defines

this key for paging zone 2 only; and adding ‘25’ to a directed pickup key (“DP25”) de-

fines this key as pickup for extension 25 only. An extender can be assigned at the time

the key function is assigned (using MMC 722 or 723) or can be added later, as de-

scribed here. You can assign extenders to the following programmed keys:

BOSS Boss and Secretary 1–2

DIR Directory dial by name type 1 (PERS), 2 (SYS) or 3 (STN)1

DP Directed Pickup Station or station group no

DS Direct Station Select Station or station group no.

FWRD Call Forward 0–5

GPIK Group Pickup 01–04

IG In/Out of Group 50–53

MMPG Meet Me Page 0–2, 5, ∗

PAGE Page 0–2, 5, ∗

PSMG Programmed Station Message 01–20

SG Station Group 50–53

SP UCD Supervise UCD group no.

SPD Speed Dial 00–49 (personal), 500–699 (system)

VT Voice mail transfer Group number

1 PERS = personal speed dial names SYS = system speed dial names STN = internal ex-

tensions (stations)

Program Keys

VOLUME UP & DOWN - Used to scroll through options.

KEYPAD - Used to enter selections.

SOFT KEYS - Move cursor left and right.

SPEAKER - Used to store data and advance to next program.

HOLD - Used to clear previous entry.