Samsung System Administration Guide
DCS-408 & 408i November 2001
28
Program Authorisation Codes [MMC 707]
You can add or change authorisation code entries. These codes are used to authorise
calls made by stations. Each code is associated with a class of service which is acti-
vated when the code is entered.
Note: To set up forced authorisation codes, see Program Forced Account and Authorisation
Codes.
Program Keys
VOLUME UP & DOWN - Used to select entry number.
KEYPAD - Used to enter the authorisation code (allowable digits 0–9).
SOFT KEYS - Move cursor left and right.
SPEAKER - Used to store data and advance to next program.
HOLD - Used to clear data.
ACTION DISPLAY
1. O pen customer programming and select 707
2. Dia l the code index entry (e.g., 005)
OR
Press
UP or DOWN to select the entry number and press
the right soft key to move the cursor
3. Ent er the authorisation code (max 4 digits) via the keypad
and press the right soft key to move the c ursor
4. Ent er class of service no. 01–30 (e.g. 05)
OR
Press
UP or DOWN to select COS number
5. Pr ess the right soft key to return to step 2
OR
Press TRSF to store and exit programming
OR
Press SPEAKER to store and advance to the next MMC
AUTHOR CODE (001)
CODE: COS:01
AUTHOR CODE (005)
CODE:_ COS:01
AUTHOR CODE (005)
CODE:1234 COS:01
AUTHOR CODE (005)
CODE:1234 COS:05