Samsung DMR78 manual Information codes, Code Symbol, Meaning, troubleshooting, Solution

Information codes

Information codes are displayed to help you better understand what is occurring with your dishwasher. If occured the below codes, you should select the Cancle&Drain option and follow the below instruction.

CODE SYMBOL	MEANING	SOLUTION
	Thermistor error
	Heater error
		Functional error. Insert detergent without loading
	Heater error
		dishes, and run a cycle.
		If the problem continues, disconnect the circuit
		breaker and contact a service center.
	Low water level error
	Half load function error
	Water supply error	Check whether the water supply line is
		connected correctly.
		Check whether the water supply valve is closed,
		the water supply is suspended or the water
		inlet valve or line is frozen or clogged by foreign
		particles.
		If the problem continues, disconnect the circuit
		breaker and contact a service center.
	The temperature of the supplied	Check the temperature of the supplied water. If
	water is too high	it is higher than 176 ˚F (80 ˚C), a functional error
		may occur with the dishwasher.
	Drain error	Check whether the drain hose is clogged or
		folded. If the problem continues, disconnect the
		circuit breaker and contact a service center.
	Water level error (over-level)	Functional error. Disconnect the circuit breaker
		and contact a service center.
	Leakage	Functional error. Close the water supply valve
		and disconnect the circuit breaker and contact a
		service center.
	Key pressed	Functional error. Turn off the dishwasher and Use
		a soft damp cloth on the control panel. (Refer to
		the cleaning section.)
		If the problem continues, disconnect the circuit
		breaker and contact a service center.

For any codes not listed above, call 1-800-SAMSUNG(726-7864)

05 troubleshooting

troubleshooting _25