Samsung manual Control panel,  setting up your dishwasher, DMR78 Series, Display, Delay Start

setting up your dishwasher

Control panel

DMR78 Series

1 2 3 4

		Displays the remaining wash time, any wash information (Delay start, Sanitize,
1	DISPLAY	Half load, Child lock), and error messages (Rinse refill, error).
		If an error occurs during an operation, an error message is displayed with a
		warning sound. Refer to the information codes page.
2	DELAY START	Delay a cycle for up to 24 hours in one-hour increments. The hour displayed
		indicates the time at which the wash will be started.
		The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high
		temperature sanitization.
		If you select the Sanitize with Extra Dry option, the “Sanitize” indicator blinks
		when the water temperature meets the sanitary temperature (over 155 ˚F
		(68 ˚C)), and then illuminates for 10 minutes at the end of the cycle while it
		sanitizes.
3	SANITIZE WITH	The Sanitize feature is in accordance with NSF/ANSI Standard 184
	EXTRA DRY
		for Residential Dishwashers. Certified residential dishwashers are not
		intended for licensed food establishments. Your dishwasher is NSF
		Certified. The cycle that is NSF certified is the Heavy Cycle with the
		sanitize with extra dry option selected.
		You should select Sanitize with Extra Dry option with rinse aid for better
		drying performance.
		Select this option to wash a small load of dishes. It is recommended that
		dishes are placed in the upper rack for this feature.
4	HALF LOAD	When Half Load is selected, the dishes placed in the lower rack will not
		be washed. Only the dishes in the upper rack will be washed.

If you select the Half Load option, both water and electricity consumption are reduced.

_ setting up your dishwasher