SECTION
Chart 31 - Seat-to-Floor Height of 17½ inches and 6° Angle
REAR WHEEL POSITION | FRONT CASTER | |||||||||
|
| PART/MODEL |
|
|
|
|
|
|
| |
OFFSET AXLE OPTION | STANDARD | MOUNTING | ADJC CAM | |||||||
|
|
| NUMBERS | POSITION | POSITION | |||||
FORWARD | REARWARD |
| ||||||||
|
| |||||||||
|
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
Hole 4 | Hole 4 | N/A for this | N/A |
|
|
| Front |
|
|
|
|
|
|
|
|
| |||||
frame style |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
| |
1113766
Hole 2
Hole 2
Notch
WARNING
If changing the
Refer to the following table to determine the obtainable seat‐to‐floor heights and seat‐to‐floor angles for 20‐inch rear wheels and 6‐inch front casters:
REFER TO | ||
HEIGHT* | ANGLE |
|
|
|
|
17½ inches | 3° | Chart 32 |
|
|
|
17½ inches | 6° | Chart 33 |
|
|
|
16½ inches | 0° | Chart 34 |
|
|
|
16½ inches | 3° | Chart 35 |
|
|
|
16½ inches | 6° | Chart 36 |
|
|
|
15½ inches | 0° | Chart 37 |
|
|
|
15½ inches | 3° | Chart 38 |
|
|
|
15½ inches | 6° | Chart 39 |
|
|
|
*NOTE: The seat‐to‐floor heights are based on urethane tires. If wheelchair is equipped with pneumatic (properly inflated) or solid rubber tires, add ¼ inch to the measurements listed above. These heights can vary +/‐ ¼ inch due to tire wear and manufacturing tolerances.
NOTE: Charts 32 to 39 apply to adult/hemi frame styles only. Refer to the charts for seat‐to‐floor height settings for adult/tall (Adult/Tall Frame Style on page 31) and super low frame styles (Super Low Frame Style on page 31) and Changing Seat‐to‐Floor Height on page 77 for recliner frame styles.
9000 Series | 48 | Part No. 1076155 |
