Invacare 9000 Series, 9000 XT, 9000 XDT Chart 29 Seat-to-Floor Height of 18½ inches and 6 Angle

SECTION 5—SEAT TO FLOOR

*NOTE: The seat‐to‐floor heights are based on urethane tires. If wheelchair is equipped with pneumatic (properly inflated) or solid rubber tires, add ¼ inch to the measurements listed above. These heights can vary +/‐ ¼ inch due to tire wear and manufacturing tolerances.

NOTE: Charts 29 to 31 apply to adult/hemi frame styles only. Refer to the charts for seat‐to‐floor height settings for adult/tall (Adult/Tall Frame Style on page 31) and super low frame styles (Super Low Frame Style on page 31) and Changing Seat‐to‐Floor Height on page 77 for recliner frame styles.

Chart 29 - Seat-to-Floor Height of 18½ inches and 6° Angle

REAR WHEEL POSITION		ANTI-TIP	FRONT CASTER
OFFSET AXLE OPTION STANDARD		PART/MODEL	MOUNTING	ADJC CAM
		NUMBERS
FORWARD	REARWARD		POSITION	POSITION
Hole 1	Hole 1	N/A On-Chair		Front
		1113766 Off-Chair
Hole 3	Hole 3
				Notch

Chart 30 - Seat-to-Floor Height of 17½ inches and 3° Angle

REAR WHEEL POSITION		ANTI-TIP	FRONT CASTER
OFFSET AXLE OPTION STANDARD		PART/MODEL	MOUNTING	ADJC CAM
		NUMBERS
FORWARD	REARWARD		POSITION	POSITION
Hole 1	Hole 1	1360 On-Chair		Front
		1058836 Off-Chair
Hole 3	Hole 3
				Notch

Part No. 1076155 47 9000 Series