SECTION
9000 SL with Adjustable Back Angle Option and 9000 XT/XDT
NOTE: For this procedure, refer to FIGURE 3.3.
1.Remove the two (2) mounting screws, spacers and locknuts that secure the two (2) back canes to the wheelchair frame (Detail “A”).
2.Reposition the back canes to one (1) of five (5) height adjustment positions (Detail “B”):
HOLE NUMBER | 1 & 2 | 2 & 3 | 3 & 4 | 4 & 5 | 5 & 6 |
|
|
|
|
|
|
BACK HEIGHT | 15 in. | 16 in. | 17 in. | 18 in. | 19 in. |
|
|
|
|
|
|
NOTE: Holes are numbered from bottom to top for reference only. There are no numbers on the back canes.
3.Reinstall the two (2) mounting screws, spacers and locknuts that secure the back canes to the wheelchair frame and securely tighten.
NOTE: The spacers must be on the outside of the wheelchair in order to properly tighten the mounting screws.
DETAIL “A”
Back Cane
Wheelchair
Frame
SpacersLocknuts
Mounting Screws
DETAIL “B”
Back Cane
| Hole |
|
Height | 6 |
|
5 |
| |
Adjustment |
| |
4 |
| |
Positions | 3 | Wheelchair |
| 2 | Frame |
| 1 |
|
FIGURE 3.3 Adjusting Back Height - 9000 SL with Adjustable Back Angle Option and 9000
XT/XDT
Adjusting Seat Width
NOTE: For this procedure, refer to FIGURE 3.4.
NOTE: When adjusting the seat width of the wheelchair, the back and seat upholstery MUST be changed. If applicable, the headrest pillow and headrest upholstery MUST be changed as well.
1.Remove the existing back and seat upholstery from the wheelchair. Refer to Replacing the Back Upholstery and Replacing the Seat Upholstery in the ownerʹs manual, part number 1056953.
9000 Series | 20 | Part No. 1076155 |
