Invacare 9000 Series, 9000 XT, 9000XT Recliner, 9000 XDT, 9000 SL Adult/Hemi Frame Styles, Angle

SECTION 5—SEAT TO FLOOR

Rear Wheel	8-Inch Fork
	Mounting Positions
Mounting Positions
	Without 2-Inch	With 2-Inch
Top	Extension	Extension
Middle
Bottom	Top	Top
	Middle (Not used
	with Adult/Tall
	frame style)
	Bottom	Bottom

Middle (Not used with Adult/Tall

frame style)

FIGURE 5.3 Adult/Tall Frame Style

Adult/Hemi Frame Styles

Refer to the charts on the following pages for obtainable seat‐to‐floor heights and seat‐to‐floor angles for wheelchairs with the adult/hemi frame style.

24-Inch Rear Wheels and 8-Inch Front Casters

WARNING

If changing the seat-to-floor angle to 6°, anti-tippers MUST be installed.

Refer to the following table to determine the obtainable seat‐to‐floor heights and seat‐to‐floor angles for 24‐inch rear wheels and 8‐inch front casters:

SEAT-TO-FLOOR	SEAT-TO-FLOOR	REFER TO
HEIGHT*	ANGLE
19½ inches	3°	Chart 1
19½ inches	6°	Chart 2
18½ inches	0°	Chart 3
18½ inches	3°	Chart 4
18½ inches	6°	Chart 5
17½ inches	0°	Chart 6
17½ inches	3°	Chart 7
17½ inches	6°	Chart 8

*NOTE: The seat‐to‐floor heights are based on urethane tires. If wheelchair is equipped with pneumatic (properly inflated) or solid rubber tires, add ¼ inch to the measurements listed above. These heights can vary +/‐ ¼ inch due to tire wear and manufacturing tolerances.

9000 Series 32 Part No. 1076155