JVC SR-9240EK appendix Preparation, Set the date and time using the Clock Adjust menu 1screen

6 PREPARATION

(Main menu)

MAIN MENU

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

PRESS (SHIFT, SET)

PRESS (MENU) TO END

[SET +/-] button

(Date/time setting screen)

CLOCK	ADJUST
YEAR	2000
MONTH	1
DAY	1
HOUR	0
MINUTE	0

PRESS (SHIFT, SET)

PRESS (MENU) TO END

	[SHIFT +/-] button and
	[SET +/-] button
CLOCK	ADJUST
YEAR	1999
MONTH	6
DAY	30
HOUR	17
MINUTE	30

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Set the date and time using the CLOCK ADJUST menu

1screen.

2Turn on this unit and the monitor and engage the Stop mode.

3Press the [MENU] button to display the main menu screen.

Press the [SHIFT +] or [SHIFT -]button to select <CLOCK ADJUST>.

4(Set the cursor arrow to <CLOCK ADJUST>.)

Press the [SET +] or [SET -] button to display the CLOCK ADJUST

5screen on the monitor. Select the item to be set.

•Press the [SHIFT +] or [SHIFT -] button to select the item. 6[ The selected item will blink.

Enter the value for the selected item with the [SET +/-] button.

•Press the [SET +] button to increase the number.

•Press the [SET -] button to decrease the number.

•The setting range for the year is from 1997 to 2096.

•This VCR uses the 24-hour clock.

•If an invalid date is set, it is automatically corrected.

(e.g.) 1999-2-29 [ 1999-2-28

Repeat steps 5 and 6 until the year, month, date, hour, and minutes

7have all been set.

End date and time setting.

• Press the [MENU] button twice.

[ The normal display is restored and the set date and time are shown on screen. The time count starts from 00 seconds.

[MENU] button

(Normal screen)

1 7 : 3 0 : 0 1 3 H 30 – 6 –1999

(Menu switch <POSITION> set to L-UP)

YEAR

MONTH DAY

HOUR MINUTE

Note:

•If you press the [OPERATE] button after setting the date and time without first pressing the [MENU] button, the set date and time are canceled.

1Set the date and time on the front panel display

2Turn the power on.

Press the [COUNT/CLOCK] button for at least 2 seconds.

3• The “year” indication blinks in the display.

4Enter the value for the year with the [SET+] or [SET-] button. Press the [SHIFT+] button: the “month” indication blinks.

•Press the [SHIFT+] or [SHIFT-] button to move the blinking section.

•Enter the value for the blinking section with the [SET+] or [SET-]

5button.

Set the “month”, “day”, “hour” and “minute” with the [SHIFT+/-] and

6[SET+/-] buttons.

When you have finished setting, press the [COUNT/CLOCK] button.

•The display returns to the clock display mode and the time count starts from 00 seconds.

Time indication on the VCR's display

•When the power is turned off, the time is displayed. When the power is turned on, set the time display mode with the [COUNT/CLOCK] button to display the current time.

•The first time you turn on the power, the time display shows a blinking "0:00:00".

•When the built-in backup battery capacity is low, the error indication E-10 appears on the display. Contact your local JVC dealer to replace the built-in battery.

24