7 RECORDING
7-7 Series Recording
The series recording function facilitates recording over much longer periods using several connected
Connections
5Connect the first VCR’s [SERIES/CLOCK OUT] terminal to the second VCR’s [SERIES/CLOCK IN] terminal. Connect the second VCR’s [SERIES/CLOCK OUT] terminal to the third VCR’s [SERIES/CLOCK IN] terminal. Repeat for all connected VCRs. Connect the VCR’s [COM] terminals as well.
5Connect a video camera and/or other source equipment to the first VCR’s video and audio input connectors. Connect the first VCR’s video and audio output connectors to the second VCR’s video and audio input connectors. Connect the second VCR’s video and audio output connectors to the third VCR’s video and audio input connectors. Repeat for all connected VCRs. Connect the last VCR’s video and audio output connectors to the monitor’s video and audio input connectors.
| Video input signal | Audio input signal |
|
| |
Rear |
| I N |
panel |
| |
|
| O U T |
| First VCR |
|
Rear panel
COM | SERIES/CLOCK | COM | SERIES/CLOCK COM | SERIES/CLOCK | |||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| IN |
| OUT |
|
|
|
| IN |
| OUT |
|
| IN |
| OUT | |||||||
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||
First VCR | Second VCR | Third VCR |
1Operations
Set the <TERMINAL SEL 1> function menu switch on the VTR mode 2 setting screen to “SERIES” (series recording) for all connected VCRs.
|
|
|
|
|
|
| VTR MODE 2 |
|
|
|
|
|
|
|
|
|
| (SUMMER TIME) | OFF |
|
|
TERMINAL |
|
|
| (TERMINAL SEL 1) | SERIES |
| Set to | |||
|
|
| ||||||||
SEL 1 |
| (TERMINAL SEL 2) | WARN |
| SERIES | |||||
REC |
|
|
|
|
|
| (REC REMAIN)) | OFF |
|
|
|
|
| (COUNT END) | OFF |
|
| ||||
REMAIN |
|
|
| |||||||
|
|
|
|
| ||||||
I N |
O U T |
PRESS (SHIFT, SET) PRESS (MENU) TO END
VCR
Second VCR |
I N
O U T
Last VCR |
|
Video output | Audio output |
|
Monitor TV
•Output a series recording signal from the [SERIES/ CLOCK OUT] terminal to start recording. Set the signal output timing with <REC REMAIN> or <COUNT END>. For details, refer to "Contents of the Function
2Menu Switches" on page 21.
To end function setting, press the MENU button to close
3the menu display and restore the time/date display.
Load cassettes with safety tab in place in all connected
4VCRs.
Engage the Record mode on the first VCR. Turn on all connected VCRs and put them in the Standby mode. This allows you to check picture and sound on the monitor.
When the recording is complete on the first VCR, the second VCR automatically starts recording. This is repeated for all connected VCRs.
Note
•If a cassette has not been loaded in any VCR in the series, series recording will stop when that VCR is reached.
37
