JVC SR-9240EK appendix Monitor ON-SCREEN Display, Main Menu Display, Operation

4 MONITOR ON-SCREEN DISPLAY

4-2 Main Menu Display

You can display date and time data recorded when an alarm input or power failure occurs, as well as the hour meter (drum rotating time) by selecting the desired item in the main menu.

The timer recording program setting screen, function menu switch setting screen, and date/time setting screen can also be displayed by selecting the desired item in the main menu.

[SHIFT +/–] buttons

[MENU] button
		SR-9240E
VIDEO CASSETTE RECORDER		OPERATE
		OPE. LOCK
COUNT/	SHIFT/TRACKING	RESET
CLOCK	MENU	/CANCEL
TIME	TIMER SET/V.LOCK	AL/PL
MODE	REC	RESET
		PAL

[SET +/–] buttons

Main menu screen

MAIN MENU

PROGRAM TIMER

FUNCTION

ALARM IN

POWER LOSS

HOUR METER

CLOCK ADJUST

PRESS (SHIFT, SET)

PRESS (MENU) TO END

Operation

5Connect the VCR's video output connector to the

1monitor's video input connector.

2Turn on the VCR and the monitor.

Press the [MENU] button.

3[The main menu screen is displayed.

Press the [SHIFT +/-] button to move the cursor arrow to the item you want to display.

•Press the [SHIFT +] button to move the cursor arrow

4down. Press the [SHIFT -] button to move it up.

Press the [SET +] or [SET -] button to display the

5selected item.

To end menu operation and restore the normal screen, press the [MENU] button.

●PROGRAM TIMER:

Displays the program setting screen for timer recording.

*Timer programming is not possible if the date and time are not set. In this case, the date/time setting screen will be displayed.

●FUNCTION:

Displays the function menu setting screen.

●ALARM IN:

Displays the date and time when an alarm signal was input.

●POWER LOSS

Displays the date and time when a power failure occurred.

●HOUR METER:

Displays the hour meter (drum rotating time).

●CLOCK ADJUST:

Displays the date/time setting screen.

*Set the date and time before using this unit.

•When the [MENU] button is pressed during playback,

the monitor screen display switches from the playback picture to the input video signal (EE picture) and the

main menu is shown on the screen.

This means that even during playback you can check menu contents. Press the [MENU] button again to

restore the playback picture.

17