JVC SR-9240E Recording with External VCR Activation Signal, Connection, Operation, Terminal

7 RECORDING

7-8 Recording with External VCR Activation Signal

Recording start/stop can be controlled externally by inputting a VCR activation signal to the [SERIES/CLOCK IN] terminal on the SR-9240E/EK’s rear panel.

Rear panel

To [COM] terminal

To [SERIES/CLOCK IN] terminal

External control equipment

Connection

VCR control signal (ground signal)

Connect the [SERIES/CLOCK IN] terminal and [COM] terminal on the SR-9240E/EK’s rear panel to the external control equipment.

LV: 0 V

Start of recording Stop or power off

Operation

	VTR MODE 2
	(SUMMER TIME)	OFF
TERMINAL	(TERMINAL SEL 1)	EXT	Set to EXT.
SEL 1	(TERMINAL SEL 2)	WARN	(External
	(REC REMAIN))	OFF	recording
	(COUNT END)	OFF
			function)

PRESS (SHIFT, SET)

PRESS (MENU) TO END

VTR mode 2 setting screen

•This function has no effect in the Timer Record Standby mode.

•If a VCR activation signal is input while the unit is already recording (started with the [REC] button), recording continues and stops when the activation signal is no longer input.

1Set the function menu switch <TERMINAL SEL 1> on the VTR mode 2 setting screen to “EXT” to use the

2external recording function.

Press the MENU button to switch the on-screen display

3to the time/date display.

Load a cassette with a safety tab in place and engage the Stop mode, the Pause mode or turn the operating mode off.

•When a VCR activation signal (ground input) is input to the rear panel’s [SERIES/CLOCK IN] terminal, recording starts automatically and continues for as long as the activation signal is input.

When the activation signal stops, the Stop or Pause mode is engaged or the operating mode is turned off (depending on the VCR status before the external recording function is used).

•When the activation signal is input again, recording starts.

38