REPLACEMENT PARTS AND ACCESSORIES

If your dryer requires replacement parts or accessories, contact the dealer from whom you purchased your dryer or the SAMSUNG customer care center at 1-800-SAMSUNG(726-7864).

INSTALLATION

Gather the required tools and parts before starting the installation.

Read and follow the instructions provided with any tools listed here.

Tools and Parts

Pliers

Cutting knife

Pipe wrench (gas only)

Nut drivers

Level

Phillips Screwdriver

Duct tape

Wrench

 

 

 

 

For proper installation, we recommend that you hire a professional. To install:

1.Move your dryer to an appropriate location for installation. Consider installing the dryer and washer side by-side. This will allow access to gas, electrical, and exhaust connections.

Lay two of the carton cushion-tops on the floor. Tip your dryer on its side so it will lay across both cushion-tops.

2.Set your dryer back in an upright position.

3.To ensure that the dryer provides optimal drying performance, it must be level. To minimize vibration, noise, and unwanted movement,the floor must be a perfectly level, solid surface.

To set the dryer to the same height as the washer, fully retract the

Level

leveling feet by turning them counterclockwise, then loosen the legs

 

 

by turning them clockwise

 

 

 

 

Retract fully

Then loosen

Adjust the leveling feet only as much as necessary to level the dryer. Extending the leveling feet more than necessary can cause the dryer to vibrate.

Leveling feet

installing your dryer _15

01 installing your dryer

DV220AE-02810A-03_EN.indd 15

2010-06-28 ¿ÀÈÄ 5:53:31

Page 15
Image 15
Samsung DV220AG*, DV220AE* Replacement Parts and Accessories, Installation, Tools and Parts, By turning them clockwise