Operating Instructions, Tips
Control panel (DV5002)
1.The SIGNALbutton
Set to OFF at the factory. When switched on, a buzzer sounds when the current program has finished. Push the SIGNAL button once to turn on and again to turn off. The indicator labelled with a bell symbol will light when this feature is switched on.
2.The TEMPERATURE button
Set to OFF at the factory. Used to switch the drying temperature from high to low. Push the button once to set to low and again to set back to high. The LOW lamp will illuminate when switched on.
3.TIME button
When pressed, indicators light up to indicate the running time. Initially the 50 indicator is lit up, then with each press the time reduces by 10 mins and the corresponding indicators light (eg: 50 minutes → 40 minutes → 30 minutes → 20 minutes →Cancelled→50 minutes.)
4.PROGRAM button
This allows the user to select from a number of
5.COURSE button
When first switched on, the COTTON setting is selected. Pushing the button toggles the setting as follows: (COTTON→SYNTHETIC →AIRING) The COURSE button is used in conjunction with the PROGRAM button to select the required
( 50 minutes → 40 minutes → 30 minutes → 20 minutes)
6.Start/Pause button
Pressing the blue button in the centre of the program selection knob starts and pauses the dryer. If you open the door the machine is paused and you must press this button to continue the program.
7. Power button
This button is used to switch the unit on and off. If the dryer is left on for more than 10 minutes without any
8.FILTER lamp
FILTER lamp turns ON to display cleaning of the filter. Open door or turn the system OFF to turn FILTER lamp OFF.
SAMSUNG Clothes Dryers Owner’s Instructions 11