installing your dryer

8.Move the position of the screw at the back of the door-hinge.

9. Fasten the screw in the bottom hole.

10.Remove the two screws holding the front-frame at the left.

11.Remove the two screws holding the holder-lever at the left.

Holer-Lever

12.Now, move to the right side of the product and fasten the two screws holding the front-frame and the two screws holding the lever-holder.

13. Align the door with the fixing holes.

14. Fasten the two screws holding the door-hinge.

Inside the drum

You can restore the direction the door opens by following the procedures above, if necessary.

English - 18