Samsung DV80K6010CW/LE manual English 43

Problem Solution

•Seams, pockets, and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the EXTRA

	DRY setting if desired.
Dries unevenly.	• If one heavy item is dried with a lightweight load, such as
	one towel with sheets, it is possible that the heavy item
	will not be completely dry when the rest of the load has
	reached the selected dryness level. Sort heavy items from
	lightweight items for best drying results.

	• Household odors from painting, varnishing, strong
		cleaners, etc. may enter the dryer with the surrounding
		room air. This is normal as the dryer draws the air from
Has an odour.		the room, heats it, pulls it through the tumbler, and
		exhausts it outside.
	• When these odors linger in the air, ventilate the room
		completely before using the dryer.
	• Dryer load is too small. Add more items or a few towels
Shuts off before load is		and restart the cycle.
dry.	•	Dryer load is too large. Remove some items and restart the
		dryer.
	•	Make sure the case filter is cleaned before every load.
		With some loads that produce high amounts of lint, it may
		be necessary to clean the filter case during the cycle.
	• Some fabrics are lint producers (for example, a fuzzy white
Lint on clothes.		cotton towel) and they should be dried separately from
		clothes that are lint trappers. (for example, a pair of black
		linen pants)
	• Divide larger loads into smaller loads for drying
	• Check pockets thoroughly before drying and drying
		clothes.
Garments still wrinkled	•	Small loads of 1 to 4 items work best.
after Wrinkle Prevent.	•	Load fewer garments. Load similar-type garments.
Odours remain in	• Fabrics containing strong odors should be washed.
clothing after Cool air.

Troubleshooting

English  43 

DV6000K-03709F-01_EN.indd 43

2016-08-16 ￿￿ 5:03:00