Installation
Installation
Before you install the dryer, make sure you have read Installation requirements on page 16. Please note that the following instructions are for installation without using a drain hose. For instructions for using a drain hose, see the next section, Drain hose. For convenience, consider installing the dryer next to your washer.
1. | Gently slide the dryer into the desired | |
A | location. | |
Use a level (A) and check the levelness | ||
2. | ||
| of the dryer from side to side and front | |
| to back. | |
3. | If the dryer is not level, adjust the | |
| levelling leg (B). Turning the leg | |
| ||
| Turning the leg clockwise extends the | |
| leg. | |
4. | Once the dryer is level, make sure the | |
| dryer stands firmly on the floor. | |
5. | Plug in the dryer. |
B
|
| NOTE | |
|
| • To set the dryer to the same height as | |
|
| the washer, fully retract (C) the levelling | |
|
| legs by turning them counter clockwise, | |
C | D | then loosen (D) the legs by turning | |
them clockwise. | |||
|
| ||
|
| • Extend the levelling leg only as much | |
|
| as necessary. Extending the levelling | |
|
| leg more than necessary can cause the | |
|
| dryer to vibrate. |
18 English
|
| ||
|
| ||
|
|
|
|