Samsung DV90N62632W/EE manual Information codes, AC6

Information codes

If the dryer fails to operate, you may see an information code on the display. Check the table below and try the suggestions.

Information code	Meaning	Action
		Clean the lint filter and/or heat
tC	Air temperature sensor issue	exchanger. If this continues, call for
		service.
tC5	Compressor temperature	Wait 2-3 minutes. Turn the power on
	sensor issue	and restart.
dC	Running the dryer with door	Close the door and restart.
	open	If this continues, call for service.
HC	Compressor overheat	Call for service.
	Water tank full	Empty the water tank, turn the
5C		power on, and restart. If this
	Drain pump is out of order
		continues, call for service.
		• Depending on the state, the dryer
		may automatically returns to
	Check communications	normal operation.
AC6	between the main and the	• Turn the dryer off and turn it on
	inverter PBAs.	again. Then, restart the cycle.
		• If the information code continues
		to appear, call for service.
		• Try restarting the cycle.
3C	Check the motor for operation.	• If the information code continues
		to appear, call for service.

For any codes not listed above, or if the information code continues to appear, call for service.

Troubleshooting

English  51 

Untitled-1 51

2018-01-22 ￿￿ 11:57:33