Surround Sound Speaker Setup
Setting Up the Display Options
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Select Multi Channel Output using UP/DOWN buttons. Then select Analog pressing the RIGHT or ENTER button.
5 Use the UP/DOWN buttons to select Speaker Setup. Then press the RIGHT or ENTER button.
6 Use the UP/DOWN or LEFT/RIGHT buttons to select the desired item. Then press the ENTER button.
The default settings : FRONT L , R(Large), CENTER(None), SURROUND (None)
Select the size of the speakers to be connected.
• Front(FL , FR) |
- Large: Normally select this. |
- Small: When the sound cracks or the surround sound effects are |
difficult to hear, select this. This activates the Dolby Digital bass |
redirection circuitry and outputs the bass frequencies of the |
speaker from the subwoofer. |
• Center |
- None: If you do not connect a center speaker, select this. |
- Large: Normally select this. |
- Small: When the sound cracks, select this. This activates the |
Dolby Digital bass redirection circuitry and outputs the bass |
frequencies of the center speaker from other speakers. |
• Surround (SL, SR) |
- None: If you do not connect a center speaker, select this. |
- Large (Rear/Side): Normally select either of these according to |
AUDIO SETUP
| Dolby Digital Out | : PCM | |
| : PCM | ||
| DTS | : Off | |
| Dynamic Compression | : On | |
| PCM Down Sampling | : On | |
| Multi Channel Output | : Analog |
|
| Speaker Setup |
|
|
|
|
|
|
|
|
|
|
AUDIO SETUP
| Dolby Digital Out | : PCM | |||||||||
| : PCM | ||||||||||
| DTS | : Off | |||||||||
| Dynamic Compression | : On | |||||||||
| PCM Down Sampling | : On | |||||||||
| Multi Channel Output | : Analog | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
| Speaker Setup |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 With the unit in Stop mode, press the MENU button.
2 Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3 Select Display Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4 Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.
TV Aspect
Still Mode
Screen Messages
Front Display
Black Level
NTSC Disc Output
|
| DISPLAY SETUP | |
|
|
| |
| TV Aspect | : 4:3 L - Box |
|
| Still Mode | : Auto | |
| Screen Massages | : On | |
| Front Display | : Auto Dim | |
| Black Level | : Off | |
| NTSC Disc Output | : PAL 60 Hz | |
|
|
|
|
|
|
|
|
TV ASPECT
4:3 Letter Box
4:3 Pan Scan
16:9 Wide
the rear speaker’s position. |
- Small (Rear/Side): When the sound cracks or the surround |
sound effects are difficult to hear, select either of these according |
to the rear speaker’s position. This activates the Dolby Digital |
bass redirection circuitry and outputs the bass frequencies of the |
rear speaker from other speakers. |
Setting up TEST
The test output signals come clockwise starting from the Front Speaker(L). Adjust Channel Balance to match to the volume of test signals memorized in the system.
FRONT(L) 
CENTER 
SUBWOOFER 
FRONT(R)
SURROUND(R) 
SURROUND(L)
NOTE |
•How to make the SETUP menu disappear or return to menu screen during set up.
Press RETURN or LEFT button.
•The subwoofer test output signal is lower than the other speakers.
•The MPEG Multichannel logo is a trademark registered by PHILIPS Corporation.
NOTE | SETUP MENU | CHANGING |
|
|
•How to make the SETUP menu disappear or return to menu screen during set up; Press the RETURN or LEFT button.
50 | 51 |
