CHANGING

SETUPMENU

AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Digital Output : PCM
Speaker SetupSpeaker Setup
Multi Channel Output : Analog
AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Digital Output : PCM
Speaker Setup
Multi Channel OutputMulti Channel Output : : Analog Analog
Surround Sound Speaker Setup (DVD-P538K only)

With the unit in Stop mode, press the MENU button.

Select Setup using UP/DOWN buttons,

then RIGHT or ENTER button.

Select Audio Setup using UP/DOWN buttons,

then press the RIGHT or ENTER button.

Select Multi Channel Output using UP/DOWN

buttons. Then select Analog pressing the RIGHT

or ENTER button.

Use the UP/DOWN buttons to select Speaker Setup.

Then press the RIGHT or ENTER button.

Use the UP/DOWN or LEFT/RIGHT buttons to select

the desired item. Then press the ENTER button.

1
2
3
4
5
6
The default settings : FRONT
L,R
(Large), CENTER(None),
SURROUND (None)
Select the size of the speakers to be connected.
•Front (FL, FR)
- Large: Normally select this.
- Small: When the sound cracks or the surround sound effects are
difficult to hear, select this. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the speaker
from the subwoofer.
•Center
- None: If you do not connect a center speaker, select this.
- Large:Normally select this.
- Small: When the sound cracks, select this. This activates the Dolby
Digital bass redirection circuitry and outputs the bass frequencies of
the center speaker from other speakers.
•Surround (SL, SR)
- None: If you do not connect a center speaker, select this.
- Large (Rear/Side):Normally select either of these according to the
rear speaker’s position.
- Small (Rear/Side): When the sound cracks or the surround sound
effects are difficult to hear, select either of these according to the
rear speaker’s position. This activates the Dolby Digital bass
redirection circuitry and outputs the bass frequencies of the rear
speaker from other speakers.
Setting up TEST
The test output signals come clockwise starting from the Front
Speaker(L). Adjust Channel Balance to match to the volume of test
signals memorized in the system.

50 51

Setting Up the Audio Options

With the unit in Stop mode, press the MENU button.

Select Setup using UP/DOWN buttons, then RIGHT

or ENTER button.

Select Audio Setup using UP/DOWN buttons, then

press the RIGHT or ENTER button.

Use the UP/DOWN buttons to select the desired

item. Then press the RIGHTor ENTER button.

AUDIO SETUP
DTS : Off
Dynamic Compression : On
PCM Down Sampling : On
Multi Channel Output : Digital
Digital OutputDigital Output : PCM: PCM
Speaker Setup
NOTE
• How to make the SETUPmenu disappear or return to menu screen during set up;
Press RETURN or LEFTbutton.
• Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
1
2
3
4
FRONT(L) CENTER SUBWOOFER FRONT(R)
SURROUND(R) SURROUND(L)
NOTE
• How to make the SETUP
menu disappear or return to
menu screen during set up.
Press RETURN or LEFTbutton.
• The subwoofer test output
signal is lower than the other
speakers.
• The MPEG Multichannel logo
is a trademark registered by
PHILIPS Corporation.

Digital Output

1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital Audio Output.
• Be sure to select the correct Digital Output
or no audio will be heard.
• When Multi Channel Output select Digital.
Dolby & MPEG-2 Digital Out works.

DTS

1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.
Select DTS when connecting to a DTS Decoder.

Dynamic Compression

1. On : To select dynamic compression.
2. Off : To select the standard range.

PCM Down Sampling

1. On : Select this when the amplifier connected to the player is not 96KHz compatible.
In this case, the 96KHz signals will be down converted to 48KHZ.
2. Off : Select this when the amplifier connected to the player is 96KHz compatible.
In this case, all signals will be output without any changes.

Multi Channel Output (DVD-P538K only)

1. Digital : Select this when using the multichannel digital audio output.
2. Analog : Select this when using the multichannel analog audio output.
NOTE

Speaker Setup(DVD-P538K only)

E138A 00141K-2(GB)XTC 4/9/03 10:21 AM Page 50