Samsung DVD-D530/ZV manual HDMI High Definition Multimedia Interface, Why does Samsung use HDMI?

-If you set the HDMI output resolution 720p,1080p or 1080i, HDMI output provides better picture quality.

-If you connect an HDMI cable between Samsung TV and this DVD player, you can operate this DVD player using your TV remote control. This is only available with Samsung TVs that support

Anynet+(HDMI-CEC).

-If your TV has an logo, then it will Supports the Anynet+ Function.

•HDMI (High Definition Multimedia Interface)

HDMI is an interface to enable the digital transmission of video and audio data with just a single connector.Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TVhaving an HDMI input jack.

•HDMI connection description HDMI connector

-Both uncompressed video data and digital audio data (LPCM or Bit Stream data).- Though the player uses a HDMI cable, the player outputs only a pure digital signal to the TV.

-If TV does not support HDCP (High-bandwidth Digital content protection), snow noise appears on the screen.

•Why does Samsung use HDMI?

Analog TVs require an analog video/audio signal. However, when playing a DVD, the data trans- mitted to a TV is digital. Therefore either a digital-to-analog converter (in the DVD player) or an analog-to-digital converter (in the TV) is required. During this conver-sion, the picture quality is degraded due to noise and signal loss. DVI technology is superior because it requires no D/A con- version and is a pure digital sig-nal from the player to your TV.

•What is the HDCP?

HDCP (High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display device (TV, projector . etc). Content is encrypted at the source device to prevent unauthorized.

D. Connection to an Audio System (2 Channel Amplifier, Dolby Digital, or MPEG2 )

1.Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier. If using a coaxial cable, connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2.Using the video signal cable(s), connect the VIDEO, COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, COMPONENT or DVI IN terminals of your TV

3.Turn on the DVD player, TV, and Amplifier.

4.Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player. Refer to your Amplifier's user manual to set the Amplifier's audio input.

DVD-D530K

DVD-D530

2-Channel stereo amplifier
or Dolby digital	RED	WHITE
D Coaxial Cable		Audio Cable
WHITE		WHITE

BLUE GREEN

RED RED

	YELLOW		RED
Audio Cable		A	Video	B	CableComponent	C
			Cable			OR
RED	WHITE YELLOW						HDMI cable
			RED BLUE GREEN		HDMI-DVI cable

DVD-D360K

		COAXIAL CABLE D		2-Channel stereo ampilfier,	RED	WHITE
				Dolby digital
			BLUE GREEN
	WHITE					WHITE
						RED
	RED
		YELLOW	RED
	VIDEO CABLE A
AUDIO CABLE			B COMPONENT CABLE
RED	WHITE	YELLOW
		RED	BLUE GREEN

5