Samsung DVD-HD870 manual Connection to a TV Progressive, To see the progressive video output

C O N N E C T I O N S

Connection to a TV (Progressive)

-What is "Progressive Scan"?

Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.

-If you set the HDMI output resolution to 720p or 1080i, the S-Video output will not output video.

1

Using Component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD player to the COMPONENT IN terminals of your TV.

2

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of your TV.

Turn on the DVD player and TV.

RED BLUE GREEN

Connections

3

Set the Video Output to P-SCANin the Display Setup menu. (See pages 52 to 54)

You can also use the VIDEO SEL. button to change the Video Output mode. (See page 12)

4

Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.

To see the progressive video output,

RED

RED	WHITE
Audio Cable
WHITE	Component cable
RED	(not included)
	BLUE GREEN

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-Depending on your TV, the connection method may differ from the illustration above.

ENG-15