Samsung DVD-HD870C manual Connections

C O N N E C T I O N S

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using an optical cable (not included), connect the DIGITAL

AUDIO OUT (OPTICAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (OPTICAL) terminal of the Amplifier.

If using a coaxial cable (not included), connect the DIGITAL

AUDIO OUT (COAXIAL) terminal on the rear of the DVD player

to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

Connections

2

Using the video signal cable(s), connect the VIDEO, S-VIDEO,COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT or HDMI-DVI IN terminals of your TV as described on pages 12 to 16.

3

Turn on the DVD player, TV, and Amplifier.

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

or

Optical Cable (not included)

Coaxial Cable (not included)

Dolby digital or

DTS amp

-When you connect the DVD player to DTS Amplifier and play a DTS disc, set the DTS to On in the Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 50 to 51)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

-Please remove the dust cover before using the optical cable (not included) and put the cover on the cable again when it's not used.

ENG-19