Manuals / Pelco / Household Appliance / Home Security System

Pelco dx8100 manual Specifications, Electrical, Mechanical, General

Models: dx8100

1 40

Download 40 pages 63.45 Kb

Page 38

Specifications

ELECTRICAL

Input Voltage	100 VAC (at 6 A) to 240 VAC (at 3 A) ±10%, 50/60 Hz, with PFC (autoswitching)
Cable Type	2 USA (117 VAC), 2 European (220 VAC), 2 UK (250 VAC)
	All, 3 prongs, molded connector, 6 ft (1.8 m) cord
Power Consumption	Maximum 720 W

MECHANICAL

Connectors
VHDCI	2 Ultra SCSI ports
Stereo Mini Jack	COM 1
RJ-45	10/100 Mbps Ethernet

GENERAL

Operating Temperature	32° to 104°F (0° to 40°C)
Relative Humidity	Maximum 95%, noncondensing
Dimensions
Desktop	19.3" D x 17.6" W x 3.5" H
	(49.02 x 44.70 x 8.89 cm)
Rack Mount	19.9" D x 19.0" W x 3.5" H (2RUs)
	(50.55 x 48.26 x 8.89 cm)
Unit Weight	66.3 lb (30.07 kg) maximum (fully equipped, 12 drives)
Shipping Weight	73 lb (33.02 kg) maximum (fully equipped, 12 drives)

(Design and product specifications subject to change without notice.)

38	C3648M (7/08)

Image 38

Pelco dx8100 manual Specifications, Electrical, Mechanical, General

Contents

I N S T A L L A T I O N C3648M 7/08DX8100 Series Digital Video Recorder SCSI Card and External Video StorageImportant Safety Instructions ContentsList of Tables Other DX8100 Optional AccessoriesList of Illustrations C3648M 7/08C3648M 7/08 RADIO AND TELEVISION INTERFERENCE Important Safety InstructionsRegulatory Notices ABOUT THE EXTERNAL STORAGE UPGRADE IntroductionDX8100HDDI EXTERNAL VIDEO STORAGE Parts List and ToolsDX8100-ISCI SCSI CARD OTHER DX8100 OPTIONAL ACCESSORIES DX8100-ISCI SCSI Card Installation PREPARING THE SCSI CARD FOR INSTALLATIONOPENING THE CHASSIS WARNINGSUNDERSTANDING THE COMPONENT LAYOUT MOVING THE MAIN CAPTURE CARD INSTALLING THE SCSI CARD REASSEMBLING THE UNIT INSTALLING THE DX8100HDDI DRIVE TRAYS Installing a New DX8100 and DX8100HDDI SystemINSTALLING THE UNITS Once installed, refer to Installing the DX8100HDDI Drive Trays3. Install the drive trays CONNECTING THE DX8100HDDI TO THE DX8100 TURNING ON THE DX8100HDDI AND THE DX8100Upgrading the DX8100 with the DX8100HDDI HARDWARE INSTALLATIONCONFIGURING THE DX8100 9. When the Computer Management window appears, click Disk Management 2 Select “Convert to Basic Disk.” b. Perform a quick format 1 Click Next four times a. Configure any unallocated drives2 Click New Partition Figure 20. Unallocated Dynamic Drives 2 Select the “Perform a quick format” check boxUSING ONLY DX8100HDDI EXTERNAL STORAGE 15. Click Close to exit the Computer Management application Figure 26. Selecting the Recovery Option 23. Repeat step 22 until all partitions are set to Allocation C3648M 7/08DELETING THE RAID ARRAY Upgrading the DX8100HDDI HDD Storage CapacityBACKING UP RECORDED VIDEO DATA OPTIONAL Figure 30. Entering the Telnet IP Address 12. Select “view and edit Logical drives,” and then press Enter Figure 32. Unmapping Partitions11. On the keyboard, press Esc twice to return to the Main Menu Figure 33. Main MenuINSTALLING THE NEW HDDS CREATING THE LOGICAL DRIVEOBTAINING AN IP ADDRESS UNMAP THE LOGICAL DRIVEPARTITIONING THE LOGICAL DRIVE Figure 42. Partition Logical Drive c. A warning message appears. Select Yes, and then press Enter MAPPING THE PARTITIONS Figure 48. Main Menu40. Press Enter four times FORMATTING THE DRIVES Figure 53. LUN MappingALLOCATING THE NEW DX8100HDDI DRIVES ELECTRICAL SpecificationsDesign and product specifications subject to change without notice MECHANICALRETURNS PRODUCT WARRANTY AND RETURN INFORMATIONWARRANTY REVISION HISTORYUSA & Canada Tel 800 Fax 800 International Tel +1 559 Fax +1 ISO9001Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA